- Direct Reading Liquid Level Gage
- Boiler Water Level Gage
- Magnet Float Type Level Gage
- Glass Products
- Level Switch
TUP-BA11A-21
KLINGAGE Tubular (Glass) Liquid Level Gages
Tubular glass forms a liquid chamber between upper and lower gage valves. It is the most simple and inexpensive liquid level gage which can be used under normal or relatively low pressures.Howeve,it is not approved by High Pressure Gas Regulation Law in JAPAN.Various types of tubes are available according to application and type of liquid. For example,glass tube marked with a red line for ease of liquid level observation, fluorocarbon tubes for corrosive service,acrylic tubes and PVC tubes etc.(Refer to Catalog No.C133E for details.)
As the option, we prepare a scale board,float, too.( Application fluid specific gravity: 0.55 The above )As the special specification, we prepare a jacket type, too.
As the application valve material, we prepare carbon steel, stainless steel (SUS304,SUS304L,SUS316,SUS316L) resin (PP,PVC), a various lining and so on, too.Consult on the special material, too.
dimensions
As for all liquid surface meters, it manufactures at the optional desire installation size.
It manufactures the standard installation length of KLINGAGE Tubular (Glass) Liquid Level Gages from a minimum of 300 mm.The one which exceeds the longest installation length corresponds by the support.( The following reference )
It manufactures to the request in the liquid surface meter installation VESSEL shape and the standard.
( Standard installation VESSEL:20A JIS 10 K The flange )
The length which is visible depends on the valve format.Refer to the following.
| Tube Material | Longest installation length |
|---|---|
| Glass pipe | 2060 |
| Acryl | 3060 |
| PVC | 4060 |
| PFA,FEP | 3060 |
| Model of Valve | Visual Length(mm) |
|---|---|
| BA11A,BA12 | center to center distance－145 |
| BB11N,BB12N (resin lined) |
center to center distance－162 |
| DB12N (Hard rubber Lined) |
center to center distance－240 |
| DB12N (Glass Lined) |
center to center distance－290 |
| BL151(PP,PVC) | center to center distance－165 |
| BL152(PP,PVC) | center to center distance－175 |
Tubular（glass）Liquid Level Gages Model Code
glass pipe special measure ring gage
（With the acrylic fiber protection case）
Nihon Klingage Co.,Ltd. manufactures the liquid surface meter product which corresponded to all the needs in the design.
As for the measure ring gage to use for the measurement extraction of the measurement pouring, various liquids such as the catalyst and so on, too, it supplies the product which corresponded to the specification, the capacity, the installation length, the diameter, the material, the graduation, the equal needs of the request.
To the high-pressure one With KLINGAGE large chamber type Direct Reading Liquid Level Gage, the measure ring gage, and so on, corresponds.
